Europressvit

Materiali

Europressvit è specializzata nella produzione e commercio di viteria e bulloneria in acciaio inossidabile nelle seguenti classi:

Aisi 304 , Aisi 304 Cu, Aisi 304 L, Aisi 316, Aisi 316 Cu, Aisi 204 Cu , Aisi 430

Acciaio al Cr-Ni, a basso tenore di C, austenitico non temperabile, resistente alla corrosione, amagnetico allo stato ricotto, leggermente magnetico se lavorato a freddo. Buona saldabilità e resistenza alla corrosione intercristallina. Ottima tenacità fino a bassissime temperature. È lucidabile elettroliticamente.

AISI/ASTM/UNS 304
Euronorm 1.4301
Nom. X5CrNi18-10
<=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 18.00-19.00
Ni 8.00-9.00
Mo –
Ti
Cu
Other N(ppm)<1100

Austenitico amagnetico in tutte le condizioni, la presenza di Cu e di Ni conferisce ottime qualità di plasticità e scorrimento buona resistenza anche in acqua marina.

AISI/ASTM/UNS 304 CU
Euronorm 1.4567
Nom. X5CrNiCu18-9-4
C <=0.030
Si <=0.75
Mn<=1.50
P <=0.040
S <=0.015
Cr 17.00-19.00
Ni 8.50-9.00
Mo –
Ti
Cu
Other N(ppm)<700

Acciaio al Cr-Ni austenitico non temperabile particolarmente adatto per costruzioni saldate. Presenta ottima resistenza alla corrosione intercristallina, impiegabile normalmente sino a 425°C.

AISI/ASTM/UNS 304 L
Euronorm 304 L
Nom. X2CrNi19-11
<=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 18.00-20.00
Ni 10.00-11.00
Mo –
Ti
Cu
Other N(ppm)<700

Acciaio al Cr-Ni-Mo austenitico non temperabile cui la presenza del Molibdeno conferisce particolare resistenza alla corrosione. Anche le proprietà meccaniche alle alte temperature sono migliori di quelle dai tipi analoghi senza Molibdeno.

AISI/ASTM/UNS 316
Euronorm 1.4401
Nom. X5CrNiMo17-12-2
C <=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 16.50-18.00
Ni 10.00-11.00
Mo 2.00-2.50
Ti
Cu
Other N(ppm)<1100

Austenitico, amagnetico, adeguato per la quasi totalità delle deformazioni plastiche a freddo. Anche in ambienti fortemente aggressivi presenta una buona resistenza alla corrosione intercristallina e di pitting.

AISI/ASTM/UNS 316Cu
Euronorm 1.4578
Nom. X3CrNiCuMo 17-11-3-2
C <=0.040
Si <=1.00
Mn <=1.00
P <=0.045
S <=0.015
Cr 10.00-18.00
Ni 11.00-11.00
Mo 2.00-2.50
Ti
Cu 3.00-3.50
Other N(ppm)<1100

Acciaio al Cr-Mn austenitico con moderate quantita’ di nichel, rame e azoto. Caratteristiche simili a Aisi 304cu con migliori resistenze meccaniche ed una resistenza inferiore alla corrosinone in ambienti acidi o in presenza di cloruri.

AISI/ASTM/UNS 204Cu
Euronorm 1.4597
Nom. X8CrMnCuNB 17-8-3
C <=0.10
Si <=2.00
Mn 6.50-8.50
P <=0.040
S <=0.015
Cr 16.00-18.00
Ni <=2.00
Mo <=1.00
Ti
Cu 2.00-3.50
Other N(ppm) 1500-3000

Acciaio inossidabile ferritico al Cr non temperabile di impiego generale con superiore resistenza alla corrosione e al calore rispetto ai tipi al 13% Cr.

AISI/ASTM/UNS 430
Euronorm 1.4016
Nom. X6Cr17
C <=0.040
Si <=1.00
Mn <=1.00
P <=0.040
S <=0.015
Cr 16.00-18.00
Ni
Mo
Ti
Cu 2.00-3.50
Other N <=0.033

 

Low-C, non-temperable, corrosion-resistant austenitic Cr-Ni steel, non-magnetic in the annealed condition, slightly magnetic if cold worked.
Good weldability and resistance to intercrystalline corrosion.
Excellent tenacity even in extremely low temperatures. May be electronically polished.

AISI/ASTM/UNS 304
Euronorm 1.4301
Nom. X5CrNi18-10
<=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 18.00-19.00
Ni 8.00-9.00
Mo –
Ti
Cu
Other N(ppm)<1100

Austenitic, non-magnetic under all conditions, the presence of Cu and Ni lends excellent plasticity and sliding properties, good resistance even in sea water.

AISI/ASTM/UNS 304 CU
Euronorm 1.4567
Nom. X5CrNiCu18-9-4
C <=0.030
Si <=0.75
Mn<=1.50
P <=0.040
S <=0.015
Cr 17.00-19.00
Ni 8.50-9.00
Mo –
Ti
Cu
Other N(ppm)<700

Non-temperable Austenitic Cr-Ni Steel particularly appropriate for welded assemblies. Shows excellent resistance to intercrystalline corrosion, can be normally used up to 425°C.

AISI/ASTM/UNS 304 L
Euronorm 304 L
Nom. X2CrNi19-11
<=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 18.00-20.00
Ni 10.00-11.00
Mo –
Ti
Cu
Other N(ppm)<700

Non-temperable Austenitic Cr-Ni-Mo steel to which Molybdenum lends additional resistance to corrosion.
The mechanical features at high temperatures are also better than those of similar types without Molybdenum.

AISI/ASTM/UNS 316
Euronorm 1.4401
Nom. X5CrNiMo17-12-2
C <=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 16.50-18.00
Ni 10.00-11.00
Mo 2.00-2.50
Ti
Cu
Other N(ppm)<1100

Austenitic, non-magnetic, right for almost all cold plastic deformations. It shows good resistance to intercrystalline and pitting corrosion even in highly aggressive environments.

AISI/ASTM/UNS 316Cu
Euronorm 1.4578
Nom. X3CrNiCuMo 17-11-3-2
C <=0.040
Si <=1.00
Mn <=1.00
P <=0.045
S <=0.015
Cr 10.00-18.00
Ni 11.00-11.00
Mo 2.00-2.50
Ti
Cu 3.00-3.50
Other N(ppm)<1100

Austenitic Cr-Mn Steel with a moderate amount of nickel, copper and nitrogen.
Similar characteristics to the Aisi 304 cu with better mechanical resistance and lower resistance to corrosion in acid environments or in the presence of chloride.

AISI/ASTM/UNS 204Cu
Euronorm 1.4597
Nom. X8CrMnCuNB 17-8-3
C <=0.10
Si <=2.00
Mn 6.50-8.50
P <=0.040
S <=0.015
Cr 16.00-18.00
Ni <=2.00
Mo <=1.00
Ti
Cu 2.00-3.50
Other N(ppm) 1500-3000

Non-temperable Cr ferritic stainless steel for general use, with higher resistance to corrosion and heat compared to the 13% Cr types.

AISI/ASTM/UNS 430
Euronorm 1.4016
Nom. X6Cr17
C <=0.040
Si <=1.00
Mn <=1.00
P <=0.040
S <=0.015
Cr 16.00-18.00
Ni
Mo
Ti
Cu 2.00-3.50
Other N <=0.033

Ein Cr-Ni Stahl, mit kleiner Niveau von C , austenitisch nicht haertbar , korrosionsbeständig, nicht magnetisch wenn wiedergekocht, leicht magnetisch wenn kaltgebearbeitet.

AISI/ASTM/UNS 304
Euronorm 1.4301
Nom. X5CrNi18-10
<=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 18.00-19.00
Ni 8.00-9.00
Mo –
Ti
Cu
Other N(ppm)<1100

Austenitisch magnetisch unter jeder Bedingung nicht magnetisch , dank der Anwesenheit von Cu und Ni gewaehrleitet ausgezeichnete Elastizitaet und Leitfaehig sowie auch eine gute Rostbeständigkeit.

AISI/ASTM/UNS 304 CU
Euronorm 1.4567
Nom. X5CrNiCu18-9-4
C <=0.030
Si <=0.75
Mn<=1.50
P <=0.040
S <=0.015
Cr 17.00-19.00
Ni 8.50-9.00
Mo –
Ti
Cu
Other N(ppm)<700

Nicht haertbar austenitischer Cr-Ni-Stahl besonders geeignet fuer Schweisskonstruktionen. Er stellt eine ausgezeichnete Widerstand der Salzrost, normalerweise einsetzbar bis 425 °.

AISI/ASTM/UNS 304 L
Euronorm 304 L
Nom. X2CrNi19-11
<=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 18.00-20.00
Ni 10.00-11.00
Mo –
Ti
Cu
Other N(ppm)<700

Nicht haertbar austenitischer Cr-Ni-Mo , mit Anwesenheit von Molybdän , mit hoehen Rostbeständigkeit
Durch Anwesenheit von Molybdän sind die mechanischen Eigenschafte auch verbessert.

AISI/ASTM/UNS 316
Euronorm 1.4401
Nom. X5CrNiMo17-12-2
C <=0.070
Si <=0.75
Mn <=2.00
P <=0.040
S <=0.030
Cr 16.50-18.00
Ni 10.00-11.00
Mo 2.00-2.50
Ti
Cu
Other N(ppm)<1100

Austenitisch, nicht magnetisch , geeignet fuer fast die ganze Menge der Kaltkunststoffverformungen Auch in stark aggressive Umgebungen , stellt eine gute Rost und Pittingwiderstand.

AISI/ASTM/UNS 316Cu
Euronorm 1.4578
Nom. X3CrNiCuMo 17-11-3-2
C <=0.040
Si <=1.00
Mn <=1.00
P <=0.045
S <=0.015
Cr 10.00-18.00
Ni 11.00-11.00
Mo 2.00-2.50
Ti
Cu 3.00-3.50
Other N(ppm)<1100

Austenitische Cr-Mn Stahl mit maessiger Menge von Nickel , Kupfer und Stickstoff
Mit Merkmale aehnlich dem AISI 304cu mit verbesserten mechanischen Widerstand und einen Rostwiderstand niedriger in sauren Umgebungen oder in Anwesenheit von Chloriden.

AISI/ASTM/UNS 204Cu
Euronorm 1.4597
Nom. X8CrMnCuNB 17-8-3
C <=0.10
Si <=2.00
Mn 6.50-8.50
P <=0.040
S <=0.015
Cr 16.00-18.00
Ni <=2.00
Mo <=1.00
Ti
Cu 2.00-3.50
Other N(ppm) 1500-3000

Ferritischer Edelstahl nicht haertbar von allgemeinen Gebrauch mit Rost und Waerme hoeher als 13% Cr bestaendig.

AISI/ASTM/UNS 430
Euronorm 1.4016
Nom. X6Cr17
C <=0.040
Si <=1.00
Mn <=1.00
P <=0.040
S <=0.015
Cr 16.00-18.00
Ni
Mo
Ti
Cu 2.00-3.50
Other N <=0.033